initial commit

This commit is contained in:
brent s. 2014-12-19 14:13:30 -05:00
commit 1d8692b8e6
52 changed files with 2828 additions and 0 deletions

25
.gitignore vendored Normal file
View File

@ -0,0 +1,25 @@
# We don't want local build settings
/build.conf

# The chroots should be generated locally ONLY. The perms/ownership would get futzed up anyways if checked into git.
/root.x86_64
/root.i686

# We don't want the copied/stripped/compressed chroots
/build64
/build32

# We don't need these in git. They should be generated dynamically.
/http
/iso
/temp
/TMPBOOT
/tftpboot
/latest.64.tar.gz
/latest.32.tar.gz
/lockfile.lck
/VERSION_INFO.txt
/BUILDNO
/screenlog*
/logs
*.swp

142
README Normal file
View File

@ -0,0 +1,142 @@
######################################################################################################################################
##### BDisk #####
##### #####
##### Written by Brent Saner #####
##### <bts@square-r00t.net> #####
##### Built upon my (Brent's) 'BDisk' ISO-building framework (http://bdisk.square-r00t.net) #####
######################################################################################################################################

## Why Arch? ##
Because it's a largely easy-to-use, well-documented (https://wiki.archlinux.org/) distro. It's no-frills and incredibly
flexible/customizable, and can be made rather slim. It's also very friendly to run as a chroot inside any other distro.

All commands below should be issued in the root working directory of this git repository. (For me, this is
/opt/dev/work/BDisk but this may be entirely different for you, depending on where you cloned the repository to.)

!!!!!! WARNING !!!!!!!
I do NOT recommend running this on a machine that is using wireless, as it will download a LOT of data.
If you ignore this warning, be prepared to explain to anyone you share your wifi with why Facebook takes 20 seconds to load,
because they WILL ask.

It should be fine over ethernet, since hardware switches are much faster and efficient than a single duplex wireless radio.

Future versions, once this project has a dumping ground, will fetch highly compressed snapshotted chroot filesystems instead
of dynamically building the entire install chroots (both x86_64 and i686) instead (with the option of building fresh locally,
disabled by default).
Till then, sorry for the inconvenience.
!!!!!!!!!!!!!!!!!!!!!!

## Prerequisites ##
-At least ~20Gb disk space free (remember, you need room for not only four chroots (one developing and one staging for i686/x86_64),
but also disk space for working, the finished ISO(s), etc.)

-The following packages installed on the build host:
(NOTE: future versions will have dependencies checked automatically and installed if necessary,
depending on distro your host build machine is. the OS detection and package installation component of that isn't
done yet though. 2014.10.31)

curl
dosfstools
libisoburn ("libisofs" on CentOS)
lynx
rsync
sed
squashfs-tools
xorriso (in RPMForge repo for CentOS 7)
xz

and *probably* a few others. the scripts run with set -e for the most part, so if something's missed, you'll know.
oh, you will know.


## (Re)Building ##
$ sudo bin/build.sh

Yeah. It's that easy. The finished product is in iso/.

Build output should look something like this:


[root@dawid BDisk]# time nice -n "-19" bin/build.sh
You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory).
If you are indeed in the correct directory, you may copy the sample at extra/build.conf.sample,
edit it for appropriate values, and copy to <PROJECT ROOT>/build.conf
For now, though, I am copying over the default.
Checking directory structure and creating lockfile at /opt/dev/work/BDisk/lockfile.lck...
/opt/dev/work/BDisk/root.i686 does not exist - creating.
/opt/dev/work/BDisk/root.x86_64 does not exist - creating.
/opt/dev/work/BDisk/build32 does not exist - creating.
/opt/dev/work/BDisk/build64 does not exist - creating.
/opt/dev/work/BDisk/iso does not exist - creating.
/opt/dev/work/BDisk/temp/bdisk does not exist - creating.
/opt/dev/work/BDisk/temp/FPOS does not exist - creating.
/opt/dev/work/BDisk/src does not exist - creating.
/opt/dev/work/BDisk/tftpboot does not exist - creating.
/opt/dev/work/BDisk/http/FPOS does not exist - creating.
/opt/dev/work/BDisk/logs does not exist - creating.
No existing chroot environment found. Creating...
Now importing settings/variables.
Checking/fetching snapshots...
Extracting snapshots. This will take a while...
Configuring snapshots...
Initializing chroots...
Prepping /opt/dev/work/BDisk/root.i686. This will take a while...
...Key initializing...Done.
...Importing keys...Done.
...Installing base packages...Done.
...Upgrading any outdated packages...Done. Finishing/cleaning up...
Prepping /opt/dev/work/BDisk/root.x86_64. This will take a while...
...Key initializing...Done.
...Importing keys...Done.
...Installing base packages...Done.
...Upgrading any outdated packages...Done. Finishing/cleaning up...
Installing common packages...
...Packages installing to /opt/dev/work/BDisk/root.i686...Compiling kernel sources...Regular packages......Creating bdisk user...Done.
Done.
...Packages installing to /opt/dev/work/BDisk/root.x86_64...Compiling kernel sources...Regular packages......Creating bdisk user...Done.
Done.
Installing packages for 32-bit...
Done.
Installing packages for 64-bit...
Done.
Syncing overlay...
Done.
Chroot setup complete.
Checking for appropriate kernel version and mksquashfs version...
Data is not sync'd to buildroot; syncing...
Syncing important files to /opt/dev/work/BDisk/build64 for building the squashed filesystem (this may take some time)...
Compressing the package DB...
cp: /opt/dev/work/BDisk/build64/usr/share/zoneinfo/EST5EDT and /opt/dev/work/BDisk/build64/etc/localtime are the same file
cp: /opt/dev/work/BDisk/root.x86_64/usr/share/zoneinfo/EST5EDT and /opt/dev/work/BDisk/root.x86_64/etc/localtime are the same file
Cleaning up unnecessary cruft in /opt/dev/work/BDisk/build64...
[64-bit] Now generating the squashed image (if we need to) and hashes. This may take some time.
[64-bit] Squashing filesystem. This can take a while depending on the size of your chroot(s).
[64-bit] Copying files for PXE, and ISO building, please be patient.
Data is not sync'd to buildroot; syncing...
Syncing important files to /opt/dev/work/BDisk/build32 for building the squashed filesystem (this may take some time)...
Compressing the package DB...
cp: /opt/dev/work/BDisk/build32/usr/share/zoneinfo/EST5EDT and /opt/dev/work/BDisk/build32/etc/localtime are the same file
cp: /opt/dev/work/BDisk/root.i686/usr/share/zoneinfo/EST5EDT and /opt/dev/work/BDisk/root.i686/etc/localtime are the same file
Cleaning up unnecessary cruft in /opt/dev/work/BDisk/build32...
[32-bit] Now generating the squashed image (if we need to) and hashes. This may take some time.
[32-bit] Squashing filesystem. This can take a while depending on the size of your chroot(s).
[32-bit] Copying files for PXE, and ISO building, please be patient.
Building the actual .iso image. This may take a while.
Setting up EFI stuff...
Checking/fetching UEFI shells...
Generating the EFI embedded FAT filesystem...
EFI configuration complete...
ISO generated; size is 1.3G.
You can find it at /opt/dev/work/BDisk/iso/bdisk-v1.04-a8666bd-any.iso
Cleaning up some stuff leftover from the build...
Finished successfully!

real 250m48.104s
user 163m6.046s
sys 8m26.573s





If you want more verbosity, check out the logs/ directory.

38
TODO Normal file
View File

@ -0,0 +1,38 @@
## General ##

-include WinMTR, build Mac OS X MTR for dist/tools on CD


## NETWORKING ##

-shorewall/some other firewall?
-WISH: locked-down VPN?
-autodetection/configuration of network. DHCP is currently running by default, but does it need to support IPv6? if so, how would the user configure their network?
-WISH: support iPXE? would save on ISO file size (letting us create MUCH bigger squash systems), but the downside is we lose EFI support and it requires a working network configuration- which defeats the purpose of a diagnostic disc.


## Building ##

-WISH: Better logging[0]
-use manual chrooting functions ONLY if distro not detected as arch. if /usr/bin/systemd-nspawn exists, use that instead
--does arch-chroot work across all distros? see https://wiki.archlinux.org/index.php/Install_bundled_32-bit_system_in_Arch64 and https://wiki.archlinux.org/index.php/Chroot
--i think this might be unnecessary. testing across other major distros is necessary, but i think i can just use the chroot'd arch-chroot
-tweak build.conf (and build.conf.sample) to source the pwd and set as BASEDIR ***if*** the project resources are present in pwd, otherwise throw warning
--this is half-done;PWD is currently used by default.
-does gummiboot? loader? wtfever it's called support splash backgrounds? can i implement that differently somehow?
-Host-specific chroot customizations (i.e. -J in <chroot>/etc/makepkg.conf
-strip out/remove unnecessary and orphan packages (e.g. gcc, make, automake, etc.)

__________________________________________________________
FOOTNOTES:


[0] I'd really like to implement the following in build.conf; like:
http://forums.fedoraforum.org/showthread.php?t=275743
# The following is the setting for "verbosity". A more accurate way of saying it is how output should be handled.
# Note that for it to be properly parsed, it MUST be in the form of a linear array (e.g. VAR=(1 2 3) ).
# '| tee -a ${BASEDIR}/logs/${FUNCNAME}.$(date +%s)' means "display output for STDOUT and STDERR, and also log STDOUT to logs/<function name>.EPOCH_TIME"
# '2>&1 /dev/null' means "hide STDOUT and STDERR, no logging"
# '>> ${BASEDIR}/logs/${FUNCNAME}.$(date +%s) 2>&1' means "log both STDOUT and STDERR to logs/<function name>.EPOCH_TIME, no output"
# '>> ${BASEDIR}/logs/${FUNCNAME}.$(date +%s)' means "log STDOUT to logs/<function name>.EPOCH_TIME, display (but don't log) STDERR)"
# '' means "no logging; display both STDOUT and STDERR"

197
bin/build.sh Executable file
View File

@ -0,0 +1,197 @@
#!/bin/bash

# A lot of snippets, inspiration, and some config directives are from https://projects.archlinux.org/archiso.git/ / the ArchLinux ISO layout.
# Many thanks and praise are deserved.


#DEBUG
#set -x

## Import settings
if [ -f "build.conf" ];
then
echo "Now importing settings/variables."
set -e
source extra/build.conf.sample
source build.conf
set +e
else
echo "You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory).
If you are indeed in the correct directory, you may copy the sample at extra/build.conf.sample,
edit it for appropriate values, and copy to <PROJECT ROOT>/build.conf"
echo 'For now, though, I am using the defaults. If the build fails complaining about a'
echo 'missing http user, you need to specify a custom/distro-pertinent one.'
cp extra/build.conf.sample build.conf
set -e
source extra/build.conf.sample
set +e
fi

## PREPARATION ##

# safemode browsing enabled. lolz
set -e

# do some basic error checking
ARCH=$(uname -m)

if [[ ${EUID} -ne 0 ]];
then
#echo "This script must be run as root" 1>&2
echo "This script must be run as root."
exit 1
elif [ -f ${LOCKFILE} ];
then
echo "Script already running, stale lockfile present, or an error occurred during last run."
echo "Please clear ${LOCKFILE} by hand before attempting another build."
echo -n "Timestamp of lockfile is: "
ls -l ${LOCKFILE} | awk '{print $6" "$7" "$8}'
exit 1
elif [[ "$(uname -s)" != "Linux" ]];
then
echo "ERROR: This script is only supported on GNU/Linux."
exit 1
elif [[ "${ARCH}" != 'x86_64' ]];
then
echo "Your hardware architecture, ${ARCH}, is not supported. Only x86_64 is supported."
echo "Dying now."
exit 1
fi

echo "Checking directory structure and creating lockfile at ${LOCKFILE}..."
touch ${LOCKFILE}

# make sure the paths exist and then check for an existing chroot session
for i in ${ROOTDIR} ${CHROOTDIR32} ${CHROOTDIR64} ${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${MOUNTPT} ${TEMPDIR}/{${UXNAME},${DISTNAME}} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}/${DISTNAME} ${BASEDIR}/logs;
do
if [ ! -d ${i} ];
then
echo "${i} does not exist - creating."
mkdir -p ${i}
fi
done

if [ ! -f "./BUILDNO" ];
then
echo '0' > ./BUILDNO
fi

CHROOTDIR_GLOB="${CHROOTDIR}"
BUILDDIR_GLOB="${BUILDDIR}"

# Set the version.
VERSION="$(git describe --abbrev=0 --tags)-$(git rev-parse --short --verify HEAD)"
BUILD="$(cat BUILDNO)"
BUILD="$(expr ${BUILD} + 1)"
echo ${BUILD} > ./BUILDNO
BUILDTIME="$(date)"
BUILD_MACHINE="$(hostname -f)"
#BUILD_USERNAME="${SUDO_USER}"
#BUILD_USERNAME="$(who am i | awk '{print $1}')"
set +e ; logname > /dev/null 2>&1
if [[ "${?}" == "0" ]];
then
BUILD_USERNAME="$(logname)"
else
BUILD_USERNAME="$(whoami)"
fi
set -e
USERNAME_REAL="$(grep ${BUILD_USERNAME} /etc/passwd | cut -f5 -d':')"

cat > VERSION_INFO.txt << EOF
Version: ${VERSION}
Build: ${BUILD}
Time: ${BUILDTIME}
Machine: ${BUILD_MACHINE}
User: ${BUILD_USERNAME} (${USERNAME_REAL})
EOF

## FUNCTIONS ##

source lib/00-im_batman.func.sh
source lib/01-holla_atcha_boi.func.sh
source lib/02-release_me.func.sh
source lib/03-facehugger.func.sh
source lib/04-chroot_wrapper.func.sh
source lib/05-jenny_craig.func.sh
source lib/06-centos_is_stupid.func.sh
source lib/07-will_it_blend.func.sh
source lib/08-stuffy.func.sh
source lib/09-yo_dj.func.sh
source lib/10-mentos.func.sh

## The Business-End(TM) ##

CHROOTDIR="${CHROOTDIR_GLOB}"
BUILDDIR="${BUILDDIR_GLOB}"
holla_atcha_boi

rm -rf ${TEMPDIR}/*
release_me 64 > /dev/null 2>&1
release_me 32 > /dev/null 2>&1

# do we need to perform any updates?
if [[ -f "${CHROOTDIR}root.x86_64/root/chroot" || -f "${CHROOTDIR}root.i686/root/chroot" ]];
then
chroot_wrapper 64
chroot_wrapper 32
centos_is_stupid
will_it_blend 64
will_it_blend 32
yo_dj
fi

if [[ ${1} == "update" ]];
then
mentos
centos_is_stupid
will_it_blend 32
will_it_blend 64
yo_dj
fi

# or do we want to just chroot in?
if [[ ${1} == "chroot" ]];
then
chroot_wrapper 64
chroot_wrapper 32
rm -f ${LOCKFILE}
exit 0
fi

# or are we just building?
if [[ ${1} == "build" ]] || [ -z ${1} ] || [[ ${1} == "all" ]];
then
if [[ "${MULTIARCH}" == "y" ]];
then
centos_is_stupid
will_it_blend 64
will_it_blend 32
yo_dj any
else
centos_is_stupid
will_it_blend 64
yo_dj 64
centos_is_stupid
will_it_blend 32
yo_dj 32
fi
fi

# clean up, clean up, everybody, everywhere
echo "Cleaning up some stuff leftover from the build..."
#rm -rf ${TEMPDIR}/*
#rm -rf ${SRCDIR}/*
cd ${ROOTDIR}

if [[ "${GIT}" == "yes" ]];
then
echo "Committing changes to git..."
git add --all .
git commit -m "post-build at $(date)"
fi

# yay! we're done!
rm -f ${LOCKFILE}
echo "Finished successfully!"

84
bin/clean.sh Executable file
View File

@ -0,0 +1,84 @@
#!/bin/bash

## Import settings
if [ -f "build.conf" ];
then
echo "Now importing settings/variables."
set -e
source extra/build.conf.sample
source build.conf
set +e
else
echo "You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory).
echo "If you are indeed in the correct directory, you may copy the sample at ../extra/build.conf.sample,
echo "edit it for appropriate values, and copy to <PROJECT ROOT>/build.conf"
echo
echo 'This error is fatal. Dying.'
exit 1
fi

if [[ ${EUID} -ne 0 ]];
then
#echo "This script must be run as root" 1>&2
echo "This script must be run as root."
echo
exit 1
elif [ -f ${LOCKFILE} ];
then
echo "Script already running, stale lockfile present, or an error occurred during last run."
echo "Please clear ${LOCKFILE} by hand before attempting another build."
echo -n "Timestamp of lockfile is: "
ls -l ${LOCKFILE} | awk '{print $6" "$7" "$8}'
exit 1
fi

echo "Creating lockfile at ${LOCKFILE}..."
touch ${LOCKFILE}

if [[ "${1}" == "all" ]];
then
DIRS="${CHROOTDIR}root.i686 ${CHROOTDIR}root.x86_64 ${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR} ${BASEDIR}/logs"
FILES="latest.32.tar.gz latest.64.tar.gz"
elif [[ "${1}" == "chroot" ]];
then
DIRS="${CHROOTDIR}root.i686 ${CHROOTDIR}root.x86_64 ${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}"
FILES=""
elif [[ "${1}" == "squash" ]];
then
DIRS="${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}"
FILES=""
else
DIRS="${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}"
FILES=""
fi

echo "I will be deleting the contents of: ${DIRS}"
echo "I will be deleting the files: ${FILES}"
read -p 'Do you wish to continue? [Y/n] ' CONFIRM

if [ -z "${CONFIRM}" ];
then
CONFIRM="y"
fi

CONFIRM=${CONFIRM:0:1}
CONFIRM=$(echo ${CONFIRM} | tr [[:upper:]] [[:lower:]])

if [[ "${CONFIRM}" != "y" ]];
then
echo 'Exiting.'
exit 0
fi


for i in "${DIRS}";
do
rm -rf ${i}/*
done

for i in "${FILES}";
do
rm -f ${i}
done

rm -f ${LOCKFILE}

6
bin/mirror.lst.sh Executable file
View File

@ -0,0 +1,6 @@
#!/bin/bash

curl -s -o /tmp/mirrorlist.tmp "https://www.archlinux.org/mirrorlist/?country=US&protocol=http&protocol=https&ip_version=4&use_mirror_status=on"
sed -i -e 's/^#Server/Server/' /tmp/mirrorlist.tmp
rankmirrors -n 6 /tmp/mirrorlist.tmp > extra/mirrorlist
sed -i -e '/^##/d' extra/mirrorlist

BIN
extra/bdisk.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.1 MiB

BIN
extra/bdisk.png.xcf Normal file

Binary file not shown.

133
extra/build.conf.sample Normal file
View File

@ -0,0 +1,133 @@
#####################################################
## BUILD.CONF SAMPLE FILE ##
#####################################################
#
# This file is used to define various variables/settings used by the build script.
#

# This should be an alpha-numeric string less than 8 characters. No spaces, etc.
# Used for metainfo
DISTNAME="BDISK"

# This should be the lowercase format of ${DISTNAME} but it can be different.
# Used for filenames etc. so no spaces
UXNAME="bdisk"

# Used for "pretty-formatted" version of the project. It can contain spaces etc.
PNAME="BDisk"

# Your/your organization's name
DISTPUB="r00t^2"

# What's this distro used for?
DISTDESC="j00 got 0wnz0r3d lulz."

# This should be the directory of the root of the project, e.g. the git's project/working directory.
# This can be left as-is as long as you're running everything from the project directory root.
BASEDIR="$(pwd)"

# This is the output directory of the ISO files when done building. This also should not be checked into git.
ISODIR="${BASEDIR}/iso"

# Where source code is kept.
SRCDIR="${BASEDIR}/src"

# Where we mount for chroots etc.
MOUNTPT="/mnt/${UXNAME}"

# This is where an http webroot can be specified. Very useful for PXE setups
# (the resulting kernel/initrd can be set to boot from HTTP initiated by PXE).
# These files will be generated whether you use them or not, so it's recommended to keep this a sane path.
HTTPDIR="${BASEDIR}/http"

# This is the root for where tftp files should be put for PXE booting.
TFTPDIR="${BASEDIR}/tftpboot"

# This is the user and group your web daemon will use. The webroot is automatically chowned.
HTTPUSR="http"
HTTPGRP="http"

# This is the user and group that your tftp files should be chowned as.
TFTPUSR="root"
TFTPGRP="root"

# If set to "no", build separate ISOs for different hardware structures.
# E.g. a separate i686 and x86_64 ISO. Note that it's TOTALLY supported to
# build a dual-architecture ISO (and is the default), it's just that it tends to be over 700MB
# (and thus doesn't fit on a normal CD. Still fits on DVDs and USBs though!)
MULTIARCH="yes"

# set to "yes" to enable pushing new changes to a git repo/committing to a local repo
GIT="no"

# If this is set, use rsync to copy the http and iso files. This is the rsync destination host.
# This is *great* for iPXE.
RSYNC_HOST=""

# Only used if RSYNC_HOST is set. The destination directory on the destination host to copy files to.
RSYNC_DEST="${BASEDIR}"

# Where the log should go, and how it should be prefixed.
# Note that the code appends, rather than replaces, logs- hence the timestamp in EPOCH time format.
LOGFILE="${BASEDIR}/logs/$(date +%s)"

# What should the regular username be? (Automatically logged in on boot)
REGUSR="${UXNAME}"

# Do we have enough horsepower on the build system to jack up the resources we throw at building?
# Enabling this will give absolute CPU preference to building the kernels and do make-time
# enhancements/optimizations (i.e. use the maximum number of CPU cores detected).
# I wouldn't enable this unless you have a dedicated build-box that isn't running much else.
I_AM_A_RACECAR="no"


# ________________________________________________________________________________________________
## RECOMMENDED DEFALTS ##
# The following shoult not be changed unless you are ABSOLUTELY, 100% SURE and COMPLETELY POSITIVE
# about what you are doing!!!

# Legacy support.
ROOTDIR="${BASEDIR}"

# This used to be defined statically (e.g. CHROOTDIR="${ROOTDIR}/chroot"),
# but is now dynamically appended. Please don't alter this unless you renamed the chroot directory paths.
CHROOTDIR="${BASEDIR}/"
CHROOTDIR32="${CHROOTDIR}root.i686"
CHROOTDIR64="${CHROOTDIR}root.x86_64"

# This is a directory we use for staging. It definitely should not be checked into git.
# It used to be defined statically (e.g. BUILDDIR="${ROOTDIR}/build"),
# but is now dynamically appended. Please don't alter this unless you renamed the chroot directory paths.
BUILDDIR="${BASEDIR}/build"

# More staging.
TEMPDIR="${ROOTDIR}/temp"

# This is where we stage the boot files.
ARCHBOOT="${TEMPDIR}/${DISTNAME}"

# Lockfile for checking for concurrent/failed builds
LOCKFILE="${ROOTDIR}/lockfile.lck"


## VARIABLE PROCESSING ##
# In order to make cleaner code, we need to make sure we can standardize some input.
# Don't even think about touching these unless you know what you're doing.

# MULTIARCH
if [ -z "${MULTIARCH}" ];
then
MULTIARCH="y"
fi

MULTIARCH=${MULTIARCH:0:1}
MULTIARCH=$(echo ${MULTIARCH} | tr [[:upper:]] [[:lower:]])

# OPTIMIZATIONS?
if [ -z "${I_AM_A_RACECAR}" ];
then
I_AM_A_RACECAR="n"
fi

I_AM_A_RACECAR=${I_AM_A_RACECAR:0:1}
I_AM_A_RACECAR=$(echo ${I_AM_A_RACECAR} | tr [[:upper:]] [[:lower:]])

7
extra/mirrorlist Normal file
View File

@ -0,0 +1,7 @@
# Server list generated by rankmirrors on 2014-11-10
Server = http://mirror.rit.edu/archlinux/$repo/os/$arch
Server = http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch
Server = http://mirrors.acm.wpi.edu/archlinux/$repo/os/$arch
Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch
Server = http://mirror.cs.pitt.edu/archlinux/$repo/os/$arch
Server = http://mirror.vtti.vt.edu/archlinux/$repo/os/$arch

0
extra/packages.32 Normal file
View File

0
extra/packages.64 Normal file
View File

104
extra/packages.both Normal file
View File

@ -0,0 +1,104 @@
# You can include comments, such as this. AUR packages are allowed.
# We need to install all X drivers.
abs
acpidump
arch-install-scripts
archiso
bridge-utils
#cryptcat
customizepkg-scripting
dhclient
dhcpcd
dialog
dmidecode
dnstracer
dnsutils
dos2unix
dosfstools
dropbear
dvd+rw-tools
elinks
ethtool
exfat-utils
findutils
firefox
gnu-netcat
google-chrome-beta
gummiboot
httping
hwdetect
hwinfo
idnkit
ifenslave
iftop
inetutils
ipcalc
iperf
iproute2
ipsec-tools
iptraf-ng
iputils
irssi
links
localepurge
lshw
lsof
lsscsi
lxde
lynx
macchanger
memtester
mkinitcpio-nfs-utils
mtr-gtk
nbd
net-tools
netctl
netselect
networkmanager
ngrep
nmap-nogui
nmon
ntfs-3g
openssh
openvpn
os-prober
pciutils
pcmciautils
ppp
pptpclient
prebootloader
procinfo-ng
procps-ng
psmisc
pwgen
rfkill
rp-pppoe
rsync
screen
sed
shorewall
socat
strace
syslinux
tcpdump
tcpslice
tcptraceroute
tmux
traceroute
tor
#udpcast
usbip
usbutils
vim-a
vim-bufexplorer
vim-indent-object
vim-minibufexpl
vim-nerdtree
vim-syntastic
vim-workspace
vnstat
vpnc
whois
wxpython
xorg
xorg-drivers

View File

@ -0,0 +1,94 @@
#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives

#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta = 0.7
Architecture = i686

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =

#NoUpgrade =
#NoExtract =

# Misc options
UseSyslog
Color
TotalDownload
CheckSpace
VerbosePkgLists

# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required

# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.

#
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#

# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.

#[testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

[extra]
Include = /etc/pacman.d/mirrorlist

#[community-testing]
#Include = /etc/pacman.d/mirrorlist

[community]
Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

[archlinuxfr]
SigLevel = Never
Server = http://repo.archlinux.fr/$arch

View File

@ -0,0 +1,103 @@
#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives

#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta = 0.7
Architecture = x86_64

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =

#NoUpgrade =
#NoExtract =

# Misc options
UseSyslog
Color
TotalDownload
CheckSpace
VerbosePkgLists

# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required

# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.

#
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#

# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.

#[testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

[extra]
Include = /etc/pacman.d/mirrorlist

#[community-testing]
#Include = /etc/pacman.d/mirrorlist

[community]
Include = /etc/pacman.d/mirrorlist

# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.

#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist

[multilib]
Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

[archlinuxfr]
SigLevel = Never
Server = http://repo.archlinux.fr/$arch

View File

@ -0,0 +1,89 @@
#!/bin/sh
# change some versions around
sed -i -e 's/^\(pkgbase=linux[[:space:]]*\)/#\1/g' ${1}
sed -i -e 's/^#\(pkgbase=linux-\)custom.*$/\1BDisk/g' ${1}
sed -i -e '/^_kernelname/a KERNVER=$(echo ${pkgver} | sed -e "s/\\\([0-9]\\\.[0-9]*\\\).*$/\\\1/")' ${1}
sed -i -e "s/^\(makedepends=.*\))$/\1 'rsync' 'git')/g" ${1}
##cp linux.preset linux-BDisk.preset
##sed -i -e 's#^[[:space:]]*install\ -D\ -m644\ "${srcdir}/linux.preset".*$#install -D -m644 "${srcdir}/linux-BDisk.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"#g' ${1}
##sed -i -e "s/\ 'fallback'//g" \
##-e '/^fallback/d' \
##-e '/^$/d' \
##-e '/^[[:space:]]*$/d' \
##-e 's#^\(default_image="/boot/initramfs-linux\).*#\1-BDisk"/g' linux-BDisk.preset
##-e 's/^\(ALL_kver="/boot/vmlinuz-linux\)\(.*\)/\1-BDisk\2/g' linux-BDisk.preset

# add source for aufs3
## 12.07.2014 - remove the "git checkout <SPECIFIC COMMIT HASH>" once a bug is fixed. currently fails with:
## LD fs/aufs/built-in.o
## CC [M] fs/aufs/module.o
##In file included from fs/aufs/module.c:24:0:
##fs/aufs/inode.h:307:12: error: function declaration isn't a prototype
##[-Werror=strict-prototypes]
## AuStubInt0(au_cpup_xattr, h_dst, h_src, ignore_flags)
## ^
##fs/aufs/aufs.h:28:21: note: in definition of macro 'AuStub'
## static inline type name(__VA_ARGS__) { body; }
## ^
##fs/aufs/inode.h:307:1: note: in expansion of macro 'AuStubInt0'
## AuStubInt0(au_cpup_xattr, h_dst, h_src, ignore_flags)
## ^
##cc1: some warnings being treated as errors
##scripts/Makefile.build:257: recipe for target 'fs/aufs/module.o' failed
##make[2]: *** [fs/aufs/module.o] Error 1
##scripts/Makefile.build:404: recipe for target 'fs/aufs' failed
##make[1]: *** [fs/aufs] Error 2
##Makefile:929: recipe for target 'fs' failed
##make: *** [fs] Error 2
sed -i -e '/^prepare()\ {/a\
\ git clone git:\/\/aufs.git.sourceforge.net\/gitroot\/aufs\/aufs3-standalone.git aufs3 > \/dev\/null 2>&1\
\ cd aufs3\
\ git checkout aufs${KERNVER} > \/dev\/null 2>&1\
\ git checkout c75f6dddc1c58950c76cc1581e4b4c7ac8365bff > \/dev\/null 2>&1\
\ cd ..\/' ${1}
#sed -i -e 's/^\(_kernelname=\).*$/\1"-BDisk"/' ${1}
sed -i -e '/^[[:space:]]*patch.*pkgver}"$/i rsync -a ../aufs3/Documentation/. Documentation/. ; rsync -a ../aufs3/fs/. fs/. ; cp -a ../aufs3/include/uapi/linux/aufs_type.h include/uapi/linux/. \
\ for i in $(ls -1 ../aufs3/*.patch) ; do patch -p1 -i ../aufs3/${i} ; done' ${1}
# and we need to be sure to build aufs3-util
#sed -i -e '/^[[:space:]]*install\ -D\ -m644\ vmlinux.*$/a\
#\ git clone git:\/\/git.code.sf.net\/p\/aufs\/aufs-util > \/dev\/null 2>&1\
#\ cd aufs-util\
#\ UTILVER=$(git branch -a | grep -v master | sort -nr | grep -v rcN | head -n1 | cut -f3 -d"\/")\
#\ git checkout ${UTILVER} > \/dev\/null 2>&1\
#\ make' ${1}

# and configure the kernel. this gets messy.
#-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FS\\\).*$/\\\1=m/g" \\\
sed -i -e '/^[[:space:]]*make\ prepare.*$/i yes "" | make olddefconfig >/dev/null' ${1}
sed -i -e '/^[[:space:]]*make\ prepare.*$/a sed -i \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FS\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BRANCH_MAX_127\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_SBILIST\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HNOTIFY\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HFSNOTIFY\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_EXPORT\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_INO_T_64\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FHSM\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_RDU\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BDEV_LOOP\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_511\\\).*$/\\\1=n/g" \\\
-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_1023\\\).*$/\\\1=n/g" \\\
-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_32767\\\).*$/\\\1=n/g" ${srcdir}/../config{,.x86_64}' ${1}
# yes, we have to do this twice. with a hammer.
sed -i -e '/^[[:space:]]*make\ prepare.*$/a sed -i \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FS\\\).*$/\\\1=m/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BRANCH_MAX_127\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_SBILIST\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HNOTIFY\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HFSNOTIFY\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_EXPORT\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_INO_T_64\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FHSM\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_RDU\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BDEV_LOOP\\\).*$/\\\1=y/g" \\\
-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_511\\\).*$/\\\1=n/g" \\\
-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_1023\\\).*$/\\\1=n/g" \\\
-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_32767\\\).*$/\\\1=n/g" .config' ${1}
sed -i -e 's/^\([[:space:]]*yes\ ""\ |\ \)make\ config/\1make olddefconfig/' ${1}
# and we have to edit the linux.install as well.
sed -i -e 's/^\(KERNEL_NAME=\).*$/\1-BDisk/g' linux.install*

View File

@ -0,0 +1 @@
bdisk.square-r00t.net

View File

@ -0,0 +1,67 @@
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="aufs ata_generic ata_piix loop nls_cp437 ext4 raid456 vfat netconsole"

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES="/usr/bin/memdiskfind"

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""

# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
#HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
#HOOKS="base udev memdisk archiso_shutdown archiso modconf net ssh archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block pcmcia filesystems keyboard livecd"
HOOKS="base udev memdisk archiso_shutdown archiso-custom modconf net ssh archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block pcmcia filesystems keyboard livecd"

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""

View File

@ -0,0 +1,7 @@
# Server list generated by rankmirrors on 2014-11-10
Server = http://mirror.rit.edu/archlinux/$repo/os/$arch
Server = http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch
Server = http://mirrors.acm.wpi.edu/archlinux/$repo/os/$arch
Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch
Server = http://mirror.cs.pitt.edu/archlinux/$repo/os/$arch
Server = http://mirror.vtti.vt.edu/archlinux/$repo/os/$arch

View File

@ -0,0 +1,57 @@
# yaourtrc - Configuration for yaourt
#
# See yaourtrc(5) for more information
#
#

# General
#AUTOSAVEBACKUPFILE=0
#DEVELBUILDDIR="/var/abs/local/yaourtbuild"
#DEVEL=0
#EDITOR="$EDITOR"
#FORCEENGLISH=0
#FORCE=0
#TMPDIR="/tmp"
TMPDIR="/var/tmp"

# SUDO
#SUDONOVERIF=0 # Avoid multiple sudo checks when timestamp_timeout=0
#SUDOREDIRECT=1 # Define to 0 in case you use a fingerprint device

# ABS
# If the package "abs" is installed, those var are parsed from abs.conf
#REPOS=() # REPOS available at $SYNCSERVER
#SYNCSERVER=""

# AUR
#AURURL="https://aur.archlinux.org"
AURCOMMENT=0
#AURDEVELONLY=0
#AURSEARCH=1
#AURUPGRADE=0
#AURVOTE=1

# Build
#EXPORT=0 # Export to 1: EXPORTDIR or PKGDEST
# 2: pacman cache (as root)
#EXPORTSRC=0 # Need EXPORT>0 to be used
#EXPORTDIR="" # If empty, use makepkg's connfiguration (see makepkg.conf)

# Prompt
NOCONFIRM=0
UP_NOCONFIRM=1
BUILD_NOCONFIRM=1
PU_NOCONFIRM=1
EDITFILES=0
NOENTER=1

# Output
USECOLOR=1
#USEPAGER=0
DETAILUPGRADE=1
SHOWORPHANS=1
TERMINALTITLE=1

# Command
#PACMAN="pacman"
#DIFFEDITCMD="vimdiff"

View File

@ -0,0 +1,186 @@
# args: source, newroot, mountpoint
_mnt_fs() {
local img="${1}"
local newroot="${2}"
local mnt="${3}"
local img_fullname="${img##*/}";
local img_name="${img_fullname%%.*}"
local dm_snap_name="${dm_snap_prefix}_${img_name}"
local ro_dev ro_dev_size rw_dev

ro_dev=$(losetup --find --show --read-only "${img}")
echo ${ro_dev} >> /run/archiso/used_block_devices
ro_dev_size=$(blockdev --getsz ${ro_dev})
if [[ "${cowfile_size}" == "100" ]]; then
rw_dev_size=${ro_dev_size}
else
# size calculation done in this way to avoid integer overflow when ro_dev_size is > 10.2G
rw_dev_size=$((ro_dev_size/100*cowfile_size))
fi

if [[ "${cow_persistent}" == "P" ]]; then
if [[ -f "/run/archiso/cowspace/${cow_directory}/${img_name}.cow" ]]; then
msg ":: Found '/run/archiso/cowspace/${cow_directory}/${img_name}.cow', using as persistent."
else
msg ":: Creating '/run/archiso/cowspace/${cow_directory}/${img_name}.cow' as persistent."
dd of="/run/archiso/cowspace/${cow_directory}/${img_name}.cow" count=0 seek=${rw_dev_size} &> /dev/null
fi
else
if [[ -f "/run/archiso/cowspace/${cow_directory}/${img_name}.cow" ]]; then
msg ":: Found '/run/archiso/cowspace/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
rm -f "/run/archiso/cowspace/${cow_directory}/${img_name}.cow"
fi
msg ":: Creating '/run/archiso/cowspace/${cow_directory}/${img_name}.cow' as non-persistent."
dd of="/run/archiso/cowspace/${cow_directory}/${img_name}.cow" count=0 seek=${rw_dev_size} &> /dev/null
fi

rw_dev=$(losetup --find --show "/run/archiso/cowspace/${cow_directory}/${img_name}.cow")
echo ${rw_dev} >> /run/archiso/used_block_devices

echo "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} 8" | dmsetup create ${dm_snap_name}

_mnt_dev "/dev/mapper/${dm_snap_name}" "${newroot}${mnt}" "-w"
echo $(readlink -f /dev/mapper/${dm_snap_name}) >> /run/archiso/used_block_devices
}

# args: /path/to/image_file, mountpoint
_mnt_sfs() {
local img="${1}"
local mnt="${2}"
local img_fullname="${img##*/}"
local sfs_dev

if [[ "${copytoram}" == "y" ]]; then
msg -n ":: Copying squashfs image to RAM..."
if ! cp "${img}" "/run/archiso/copytoram/${img_fullname}" ; then
echo "ERROR: while copy '${img}' to '/run/archiso/copytoram/${img_fullname}'"
launch_interactive_shell
fi
img="/run/archiso/copytoram/${img_fullname}"
msg "done."
fi
sfs_dev=$(losetup --find --show --read-only "${img}")
echo ${sfs_dev} >> /run/archiso/used_block_devices
_mnt_dev "${sfs_dev}" "${mnt}" "-r"
}

# args: device, mountpoint, flags
_mnt_dev() {
local dev="${1}"
local mnt="${2}"
local flg="${3}"

mkdir -p "${mnt}"

msg ":: Mounting '${dev}' to '${mnt}'"

while ! poll_device "${dev}" 30; do
echo "ERROR: '${dev}' device did not show up after 30 seconds..."
echo " Falling back to interactive prompt"
echo " You can try to fix the problem manually, log out when you are finished"
launch_interactive_shell
done

if mount "${flg}" "${dev}" "${mnt}"; then
msg ":: Device '${dev}' mounted successfully."
else
echo "ERROR; Failed to mount '${dev}'"
echo " Falling back to interactive prompt"
echo " You can try to fix the problem manually, log out when you are finished"
launch_interactive_shell
fi
}

_verify_checksum() {
local _status
cd "/run/archiso/bootmnt/${archisobasedir}/${arch}"
md5sum -c airootfs.md5 > /tmp/checksum.log 2>&1
_status=$?
cd "${OLDPWD}"
return ${_status}
}

run_hook() {
[[ -z "${arch}" ]] && arch="$(uname -m)"
[[ -z "${cowspace_size}" ]] && cowspace_size="75%"
[[ -z "${copytoram_size}" ]] && copytoram_size="75%"
[[ -z "${archisobasedir}" ]] && archisobasedir="arch"
[[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="arch"
[[ -z "${archisodevice}" ]] && archisodevice="/dev/disk/by-label/${archisolabel}"
if [[ -z "${cowfile_size}" ]]; then
cowfile_size="100"
else
cowfile_size=${cowfile_size/%}
fi

if [[ -n "${cow_label}" ]]; then
cow_device="/dev/disk/by-label/${cow_label}"
[[ -z "${cow_persistent}" ]] && cow_persistent="P"
elif [[ -n "${cow_device}" ]]; then
[[ -z "${cow_persistent}" ]] && cow_persistent="P"
else
cow_persistent="N"
fi

[[ -z "${cow_directory}" ]] && cow_directory="persistent_${archisolabel}/${arch}"

# set mount handler for archiso
mount_handler="archiso_mount_handler"
}

# This function is called normally from init script, but it can be called
# as chain from other mount handlers.
# args: /path/to/newroot
archiso_mount_handler() {
local newroot="${1}"

if ! mountpoint -q "/run/archiso/bootmnt"; then
_mnt_dev "${archisodevice}" "/run/archiso/bootmnt" "-r"
if [[ "${copytoram}" != "y" ]]; then
echo $(readlink -f ${archisodevice}) >> /run/archiso/used_block_devices
fi
fi

if [[ "${checksum}" == "y" ]]; then
if [[ -f "/run/archiso/bootmnt/${archisobasedir}/${arch}/airootfs.md5" ]]; then
msg -n ":: Self-test requested, please wait..."
if _verify_checksum; then
msg "done. Checksum is OK, continue booting."
else
echo "ERROR: one or more files are corrupted"
echo "see /tmp/checksum.log for details"
launch_interactive_shell
fi
else
echo "ERROR: checksum=y option specified but ${archisobasedir}/${arch}/airootfs.md5 not found"
launch_interactive_shell
fi
fi

if [[ "${copytoram}" == "y" ]]; then
msg ":: Mounting /run/archiso/copytoram (tmpfs) filesystem, size=${copytoram_size}"
mkdir -p /run/archiso/copytoram
mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram /run/archiso/copytoram
fi

if [[ -n "${cow_device}" ]]; then
_mnt_dev "${cow_device}" "/run/archiso/cowspace" "-r"
echo $(readlink -f ${cow_device}) >> /run/archiso/used_block_devices
mount -o remount,rw "/run/archiso/cowspace"
else
msg ":: Mounting /run/archiso/cowspace (tmpfs) filesystem, size=${cowspace_size}..."
mkdir -p /run/archiso/cowspace
mount -t tmpfs -o "size=${cowspace_size}",mode=0755 cowspace /run/archiso/cowspace
fi
mkdir -p "/run/archiso/cowspace/${cow_directory}"

_mnt_sfs "/run/archiso/bootmnt/${archisobasedir}/${arch}/airootfs.sfs" "/run/archiso/sfs/airootfs"
# _mnt_fs "/run/archiso/sfs/airootfs/airootfs.img" "${newroot}" "/"
mount --bind "run/archiso/sfs/airootfs" "/new_root"

if [[ "${copytoram}" == "y" ]]; then
umount /run/archiso/bootmnt
fi
}

# vim:ft=sh:ts=4:sw=4:et:

View File

@ -0,0 +1,15 @@
# vim: set ft=sh:

run_cleanuphook () {
msg ":: Mounting aufs on / with tmpfs=rw, ${root}=ro ..."
modprobe aufs

echo "Now attempting aufs mount..."

mkdir /new_root.hw
mount --move /new_root /new_root.hw
mkdir /dev/shm
mount -t tmpfs none /dev/shm
mount -t aufs none /new_root -o dirs=/dev/shm=rw:/new_root.hw=ro -o noatime
pkill -9 dropbear #kill SSH (in preparation for the live system starting ssh on port 22
}

View File

@ -0,0 +1,67 @@
#!/usr/bin/ash

run_hook ()
{
local line i address netmask gateway dns0 dns1 rootserver rootpath defaultrootpath defaultserver

: > /ip_opts

if [ -z "${ip}" -a -n "${nfsaddrs}" ]; then
ip="${nfsaddrs}"
fi

if [ -n "${ip}" ]; then
# setup network and save some values
ipconfig "ip=${ip}" | while read line; do
if [ "${line#"IP-Config:"}" != "${line}" ]; then
continue
fi

line="$(echo ${line} | sed -e 's/ :/:/g;s/: /=/g')"

for i in ${line}; do
case "${i}" in
address=*)
echo "${i}" >> /ip_opts
;;
netmask=*)
echo "${i}" >> /ip_opts
;;
gateway=*)
echo "${i}" >> /ip_opts
;;
dns0=*)
echo "${i}" >> /ip_opts
;;
dns1=*)
echo "${i}" >> /ip_opts
;;
rootserver=*)
echo "${i}" >> /ip_opts
;;
rootpath=*)
echo "${i}" >> /ip_opts
;;
esac
done
done

echo "device=$(echo ${ip} | cut -d: -f6)" >> /ip_opts
fi

. /ip_opts

echo "IP-Config: ${address}/${netmask}"
echo "IP-Config: gw: ${gateway} dns0: ${dns0} dns1: ${dns1}"

[ -d /dev/pts ] || mkdir -p /dev/pts
mount -t devpts devpts /dev/pts

echo "Starting dropbear"
/usr/sbin/dropbear -E
}

run_cleanuphook ()
{
pkill -9 dropbear
}

View File

@ -0,0 +1,23 @@
#!/bin/bash

build() {
add_module "cdrom"
add_module "loop"
add_module "dm-snapshot"

add_runscript

add_binary /usr/lib/udev/cdrom_id
add_binary blockdev
add_binary dmsetup
add_binary losetup
add_binary mountpoint
add_binary truncate

add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
add_file /usr/lib/udev/rules.d/10-dm.rules
add_file /usr/lib/udev/rules.d/95-dm-notify.rules
add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
}

# vim: set ft=sh ts=4 sw=4 et:

View File

@ -0,0 +1,21 @@
#!/bin/bash
build()
{
add_module 'squashfs'
add_module 'loop'
add_module 'aufs'

add_binary "sed"
add_binary "pkill"

add_runscript

}
help()
{
cat <<HELPEOF
Mount a squashed flat-file directory with AUFS3 on /
HELPEOF
}

View File

@ -0,0 +1,110 @@
#!/bin/bash

get_fingerprint() {
local keyfile="$1"
dropbearkey -y -f "${keyfile}" | sed -n '/^Fingerprint:/ {s/Fingerprint: *//; p}'
}

display_fingerprints() {
local keyfile

for keyfile in "/etc/dropbear/dropbear_dss_host_key" "/etc/dropbear/dropbear_rsa_host_key" ; do
if [ ! -r "${keyfile}" ] ; then
return 1
fi
echo "$(basename "${keyfile}") : $(get_fingerprint "${keyfile}")"
done
}

copy_openssh_keys() {
local osshrsa="/etc/ssh/ssh_host_rsa_key"
local osshdsa="/etc/ssh/ssh_host_dsa_key"

local dbpre="/etc/dropbear/dropbear_"

[ -f "$osshrsa" ] && [ -f "$osshdsa" ] || return 1

dropbearconvert openssh dropbear $osshrsa ${dbpre}rsa_host_key
dropbearconvert openssh dropbear $osshdsa ${dbpre}dss_host_key
}

generate_keys() {
local keyfile keytype
for keytype in dss rsa ; do
keyfile="/etc/dropbear/dropbear_${keytype}_host_key"
echo "Generating ${keytype} host key for dropbear ..."
dropbearkey -t "${keytype}" -f "${keyfile}"
done
}

make_etc_passwd() {
echo 'root:x:0:0:root:/:/bin/ash' > "${TMPDIR}"/passwd
}

build ()
{
#
# Begin real processing
#

# Are we even needed?
if [ ! -e "/etc/dropbear/root_key" ]; then
echo "There is no root key in /etc/dropbear/root_key existent; exit"
return 0
fi

# if TMPDIR is set leave it alone otherwise set
[ -z $TMPDIR ] && TMPDIR='/tmp/dropbear_initrd_encrypt'

# check if TMPDIR exsists if not make it
[ -d $TMPDIR ] || mkdir -p $TMPDIR

umask 0022

[ -d /etc/dropbear ] && mkdir -p /etc/dropbear

display_fingerprints || copy_openssh_keys || generate_keys

[ -e "${TMPDIR}/passwd" ] && ( grep -q -e '^root:' "${TMPDIR}/passwd" ) || make_etc_passwd

add_checked_modules "/drivers/net/"
add_binary "rm"
add_binary "dropbear"
add_binary "killall"

echo '/bin/ash' > "${TMPDIR}"/shells
add_file "${TMPDIR}/shells" "/etc/shells"

cat /etc/dropbear/root_key > "${TMPDIR}"/authorized_keys

add_dir "/.ssh"
add_file "${TMPDIR}/authorized_keys" "/.ssh/authorized_keys"
add_file "${TMPDIR}/passwd" "/etc/passwd"
add_dir "/etc/dropbear"
add_file "/etc/dropbear/dropbear_rsa_host_key"
add_file "/etc/dropbear/dropbear_dss_host_key"
add_file "/lib/libnss_files.so.2"
add_binary "ip" "/sbin/ip"
add_dir "/var/run"

touch "${TMPDIR}"/lastlog
add_dir "/var/log"
add_file "${TMPDIR}/lastlog" "/var/log/lastlog"
add_binary "/usr/lib/initcpio/ipconfig" "/bin/ipconfig"

# cleanup
rm "${TMPDIR}/shells"
rm "${TMPDIR}/authorized_keys"
rm "${TMPDIR}/passwd"
rm "${TMPDIR}/lastlog"

add_runscript
}

help ()
{
cat<<HELPEOF
Allow SSH access to an initial environment for debugging.
HELPEOF
}

30
lib/00-im_batman.func.sh Normal file
View File

@ -0,0 +1,30 @@
function im_batman {
set +e # false errors are bad mmk
# Detect the distro and set some vars
if [ -f "/usr/bin/yum" ]; # CentOS/Redhat, etc.
then
OS_STRING='RHEL-like'
DISTRO='RHEL'
INST_CMD='yum -y install '
elif [ -f "/usr/bin/pacman" ]; # Arch, Manjaro, etc.
then
OS_STRING='Arch-like'
DISTRO='Arch'
INST_CMD='pacman -S '
elif [ -f "/usr/bin/emerge" ]; # Gentoo
then
OS_STRING='Gentoo-like'
DISTRO='Gentoo'
INST_CMD='emerge '
elif [ -f "/usr/bin/apt-get" ]; # Debian, Ubuntu (and derivatives), etc.
then
OS_STRING='Debian-like'
DISTRO="Debian"
INST_CMD='apt-get install '
else
echo 'Sorry, I cannot detect which distro you are running. Please report this along with what distro you are running. Dying now.'
exit 1
fi

set -e # and turn this back on lolz
}

View File

@ -0,0 +1,11 @@
function holla_atcha_boi {
# Do we have an existing chroot set up yet? If not, create.
if [[ ! -d "root.x86_64/root" || ! -d "root.i686/root" ]];
then
echo "No existing chroot environment found. Creating..."
rm -f ${LOCKFILE}
${BASEDIR}/lib/mk.chroot.sh
touch ${LOCKFILE}
fi
}

50
lib/02-release_me.func.sh Normal file
View File

@ -0,0 +1,50 @@
function release_me () {
## check for mountpoints from a manual chroot and umount them if they're still mounted.
## NOTE: you can use findmnt(8) to view a tree of mountpoints, including bindmounts etc.
# Is there an active chroot?
set +e
if [[ "${1}" == "64" ]];
then
local CHROOTDIR="${CHROOTDIR}root.x86_64"
local BUILDDIR="${BUILDDIR}64"
elif [[ "${1}" == "32" ]];
then
local CHROOTDIR="${CHROOTDIR}root.i686"
local BUILDDIR="${BUILDDIR}32"
else
echo "WHOOPS. We hit an error that makes no logical sense."
echo 'Dying.'
exit 1
fi

echo "Checking for and cleaning up mountpoints from the chroot environment..."
for i in tmp run dev/shm dev/pts dev
do
umount -l ${CHROOTDIR}/${i}
done
# and is it using efivars?
if [ -d ${CHROOTDIR}/sys/firmware/efi/efivars ];
then
umount -l ${CHROOTDIR}/sys/firmware/efi/efivars
fi
# and finish cleaning up normal chroots
for i in sys proc
do
umount -l ${CHROOTDIR}/${i}
done
# and is it mounted via two mountpoints a la arch-chroot?
mount | awk '{print $3}' | grep -q ${MOUNTPT}
if [[ ${?} == "0" ]];
then
umount ${MOUNTPT}
fi
if [ -d ${SRCDIR}/efiboot ];
then
umount -l ${SRCDIR}/efiboot
fi
rm -rf ${SRCDIR}/efiboot
#rm -rf ${TEMPDIR}/*
set -e # and go back to failing on non-0 exit status.
CHROOTDIR="${CHROOTDIR_GLOB}"
BUILDDIR="${BUILDDIR_GLOB}"
}

39
lib/03-facehugger.func.sh Normal file
View File

@ -0,0 +1,39 @@
function facehugger () {
local ARCHSUFFIX="${1}"
if [[ "${1}" == "64" ]];
then
local CHROOTDIR="${CHROOTDIR}root.x86_64"
local BUILDDIR="${BUILDDIR}64"
elif [[ "${1}" == "32" ]];
then
local CHROOTDIR="${CHROOTDIR}root.i686"
local BUILDDIR="${BUILDDIR}32"
else
echo "WHOOPS. We hit an error that makes no logical sense."
echo 'Dying.'
exit 1
fi
echo "Creating manual chroot mountpoints."
# Latch on and inject ourself into the environment. Get it?
mount -t proc -o nosuid,noexec,nodev proc ${CHROOTDIR}/proc &&
mount -t sysfs -o nosuid,noexec,nodev,ro sys ${CHROOTDIR}/sys &&
if [ -d /sys/firmware/efi/efivars ];
then
mount -t efivarfs -o nosuid,noexec,nodev efivarfs ${CHROOTDIR}/sys/firmware/efi/efivars
fi &&
mount -t devtmpfs -o mode=0755,nosuid udev ${CHROOTDIR}/dev &&
mount -t devpts -o mode=0620,gid=5,nosuid,noexec devpts ${CHROOTDIR}/dev/pts &&
mount -t tmpfs -o mode=1777,nosuid,nodev shm ${CHROOTDIR}/dev/shm &&
mount -t tmpfs -o nosuid,nodev,mode=0755 run ${CHROOTDIR}/run &&
mount -t tmpfs -o mode=1777,strictatime,nodev,nosuid tmp ${CHROOTDIR}/tmp
echo "======================"
echo "NOW ENTERING CHROOT..."
echo "======================"
chroot ${CHROOTDIR} /bin/bash
rm -f ${CHROOTDIR}/root/chroot
CHROOTDIR="${CHROOTDIR_GLOB}"
BUILDDIR="${BUILDDIR_GLOB}"
release_me ${ARCHSUFFIX}
}

View File

@ -0,0 +1,29 @@
function chroot_wrapper () {
local ARCHSUFFIX="${1}"
if [[ "${1}" == "64" ]];
then
local CHROOTDIR="${CHROOTDIR}root.x86_64"
local BUILDDIR="${BUILDDIR}64"
elif [[ "${1}" == "32" ]];
then
local CHROOTDIR="${CHROOTDIR}root.i686"
local BUILDDIR="${BUILDDIR}32"
else
echo "WHOOPS. We hit an error that makes no logical sense."
echo 'Dying.'
exit 1
fi

if [ -f "/usr/bin/systemd-nspawn" ];
then
CHROOTCMD="systemd-nspawn -D ${CHROOTDIR}"
else
CHROOTCMD="facehugger ${ARCHSUFFIX}"
fi

echo "NOW ENTERING ${CHROOTDIR}...."
echo "_____________________________"
${CHROOTCMD}
CHROOTDIR="${CHROOTDIR_GLOB}"
BUILDDIR="${BUILDDIR_GLOB}"
}

View File

@ -0,0 +1,61 @@
function jenny_craig () {
BUILDDIR="${BUILDDIR_GLOB}"
if [[ "${1}" == "64" ]];
then
local CHROOTDIR="${CHROOTDIR}root.x86_64"
local BUILDDIR="${BUILDDIR}64"
elif [[ "${1}" == "32" ]];
then
local CHROOTDIR="${CHROOTDIR}root.i686"
local BUILDDIR="${BUILDDIR}32"
else
echo "WHOOPS. We hit an error that makes no logical sense."
echo 'Dying.'
exit 1
fi

local _CURDIR=$(pwd)
echo "Syncing important files to ${BUILDDIR} for building the squashed filesystem (this may take some time)..."

# we have to do this or else the package management from LIVE doesn't really work too hot.
cd ${CHROOTDIR}/var/lib/pacman
echo "Compressing the package DB..."
#rm -f ${CHROOTDIR}/usr/local/pacman.db.tar.xz
tar -cf - local | xz -c9 > ../../../usr/local/pacman.db.tar.xz
cd ${_CURDIR}

# sync over new changes and trim out the fat
rsync -a --delete ${CHROOTDIR}/. ${BUILDDIR}/.
set +e
cp -af ${BUILDDIR}/usr/share/zoneinfo/EST5EDT ${BUILDDIR}/etc/localtime
cp -af ${CHROOTDIR}/usr/share/zoneinfo/EST5EDT ${CHROOTDIR}/etc/localtime
set -e
cp -af ${BUILDDIR}/usr/share/locale/locale.alias ${BUILDDIR}/tmp/.
echo "Cleaning up unnecessary cruft in ${BUILDDIR}..."

rm -f ${BUILDDIR}/root/.bash_history
rm -f ${BUILDDIR}/root/.viminfo
#rm -f ${BUILDDIR}/etc/localtime
rm -f ${BUILDDIR}/root/.bashrc
# DISABLE when no longer building custom kernel
find ${BUILDDIR}/usr/lib/modules/ -maxdepth 1 -iname "*-ARCH" -exec rm -rf '{}' \;
rm -rf ${BUILDDIR}/usr/share/locale/*
mv -f ${BUILDDIR}/tmp/locale.alias ${BUILDDIR}/usr/share/locale/.
rm -rf ${BUILDDIR}/var/cache/pacman/*
rm -rf ${BUILDDIR}/var/cache/pkgfile/*
rm -rf ${BUILDDIR}/var/lib/pacman/*
mkdir -p ${BUILDDIR}/var/lib/pacman/local
rm -rf ${BUILDDIR}/var/abs/local/yaourtbuild/*
rm -rf ${BUILDDIR}/usr/share/zoneinfo
rm -rf ${BUILDDIR}/tmp/*
rm -rf ${BUILDDIR}/var/tmp/*
rm -rf ${BUILDDIR}/var/abs/*
rm -rf ${BUILDDIR}/run/*
rm -rf ${BUILDDIR}/boot/*
rm -rf ${BUILDDIR}/usr/src/*
rm -rf ${BUILDDIR}/var/log/*
rm -rf ${BUILDDIR}/.git
CHROOTDIR="${CHROOTDIR_GLOB}"
BUILDDIR="${BUILDDIR_GLOB}"
}

View File

@ -0,0 +1,70 @@
function centos_is_stupid {
echo "Checking for appropriate kernel version and mksquashfs version..."
SQFS_VER=$(mksquashfs -version 2>&1 | head -n1 | awk '{print $3}' | sed -re 's/(^[0-9]*\.[0-9]*).*$/\1/g')
KERN_VER=$(uname -r | cut -f1 -d"-")
SQUASH_OPTS="-noappend -comp xz"

set +e
ver_check() {
[ "$1" == "$2" ] && return 10
ver1front=`echo $1 | cut -d "." -f -1`
ver1back=`echo $1 | cut -d "." -f 2-`
ver2front=`echo $2 | cut -d "." -f -1`
ver2back=`echo $2 | cut -d "." -f 2-`
if [ "$ver1front" != "$1" ] || [ "$ver2front" != "$2" ]; then
[ "$ver1front" -gt "$ver2front" ] && return 11
[ "$ver1front" -lt "$ver2front" ] && return 9
[ "$ver1front" == "$1" ] || [ -z "$ver1back" ] && ver1back=0
[ "$ver2front" == "$2" ] || [ -z "$ver2back" ] && ver2back=0
ver_check "$ver1back" "$ver2back"
return $?
else
[ "$1" -gt "$2" ] && return 11 || return 9
fi
}
ver_check ${KERN_VER} "2.6.38"
KERNTEST=${?}
ver_check ${SQFS_VER} "4.2"
SQFSTEST=${?}
if [ ${KERNTEST} -lt "10" ];
then
echo "You need a newer kernel to even think about doing this. (>= 2.6.38)"
echo "If you're on CentOS, there are 3.x branches available via the elrepo repository."
echo "I recommend the 'kernel-lt' package from there."
echo "Bailing out."
exit 1
#elif [ ${SQFS_VER} -ge "4.2" ] && [ ${KERN_VER} -ge "2.6.38" ];
elif [ ${SQFSTEST} -ge "10" ] && [ ${KERNTEST} -ge "10" ];
then
#echo "Awesome; your mksquashfs (if found) is not less than v4.2."
SQUASH_CMD=$(which mksquashfs)
if [ ${?} != "0" ];
then
echo "...Except you need to install whatever package you need to for mksquashfs."
exit 1
else
SQUASH_CMD=$(which mksquashfs)
fi
elif [ ${SQFSTEST} -lt "10" ] && [ ${KERNTEST} -ge "10" ];
then
if [ ! -f ${SRCDIR}/squashfs4.2/squashfs-tools/mksquashfs ];
then
echo "Boy howdy. We need to compile a custom version of the squashfs-tools because you aren't running a version that supports XZ. Give me a second."
set -e
mkdir -p ${SRCDIR} ${ROOTDIR}/bin
cd ${SRCDIR}
#wget --quiet -O squashfs4.2.tar.gz "http://downloads.sourceforge.net/project/squashfs/squashfs/squashfs4.2/squashfs4.2.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fsquashfs%2Ffiles%2F&ts=1387047818&use_mirror=hivelocity"
curl -o squashfs4.2.tar.gz "http://downloads.sourceforge.net/project/squashfs/squashfs/squashfs4.2/squashfs4.2.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fsquashfs%2Ffiles%2F&ts=1387047818&use_mirror=hivelocity" >> "${LOGFILE}.${FUNCNAME}" 2>&1
tar -zxf squashfs4.2.tar.gz
cd squashfs4.2/squashfs-tools
make clean
sed -i -e 's/^#\(XZ_SUPPORT\)/\1/g' Makefile
make
SQUASH_CMD="${SRCDIR}/squashfs4.2/squashfs-tools/mksquashfs"
else
echo "Using custom-compiled mksquashfs from an earlier run."
SQUASH_CMD="${SRCDIR}/squashfs4.2/squashfs-tools/mksquashfs"
fi
fi
set -e
}

View File

@ -0,0 +1,77 @@
function will_it_blend () {
local ARCHSUFFIX="${1}"
if [[ "${1}" == "64" ]];
then
local CHROOTDIR="${CHROOTDIR}root.x86_64"
local BUILDDIR="${BUILDDIR}64"
local AIROOT="x86_64"
_CHROOT=${CHROOTDIR}
_BUILD=${BUILDDIR}
_AIROOT=${AIROOT}
elif [[ "${1}" == "32" ]];
then
local CHROOTDIR="${CHROOTDIR}root.i686"
local BUILDDIR="${BUILDDIR}32"
local AIROOT="i686"
_CHROOT=${CHROOTDIR}
_BUILD=${BUILDDIR}
_AIROOT=${AIROOT}
else
echo "WHOOPS. We hit an error that makes no logical sense."
echo 'Dying.'
exit 1
fi

if [[ "${I_AM_A_RACECAR}" == "y" ]];
then
RACECAR_CHK='nice -n "-19" '
else
RACECAR_CHK=""
fi

if [ "${CHROOTDIR}/root/.bash_history" -nt "${ARCHBOOT}/${AIROOT}/airootfs.sfs" ] || [ ! -d "${BUILDDIR}/root/" ];
then
echo "Data is not sync'd to buildroot; syncing..."
CHROOTDIR="${CHROOTDIR_GLOB}"
BUILDDIR="${BUILDDIR_GLOB}"
jenny_craig ${ARCHSUFFIX}
CHROOTDIR="${_CHROOT}"
BUILDDIR="${_BUILD}"
fi
echo "[${ARCHSUFFIX}-bit] Now generating the squashed image (if we need to) and hashes. This may take some time."
BUILDDIR="${BUILDDIR_GLOB}"
local BUILDDIR="${BUILDDIR}${ARCHSUFFIX}"

# now let's build the squashed image... and generate some checksums as well to verify download integrity.
mkdir -p ${ARCHBOOT}/${AIROOT}
if [ ! -f "${ARCHBOOT}/${AIROOT}/airootfs.sfs" ] || [ "${CHROOTDIR}/root/.bash_history" -nt "${ARCHBOOT}/${AIROOT}/airootfs.sfs" ];
then
echo "[${ARCHSUFFIX}-bit] Squashing filesystem. This can take a while depending on the size of your chroot(s)."
${RACECAR_CHK}${SQUASH_CMD} ${BUILDDIR} ${ARCHBOOT}/${AIROOT}/airootfs.sfs ${SQUASH_OPTS} >> "${LOGFILE}.${FUNCNAME}" 2>&1
cd ${ARCHBOOT}/${AIROOT}
${RACECAR_CHK}sha256sum airootfs.sfs >> airootfs.sha256
${RACECAR_CHK}md5sum airootfs.sfs >> airootfs.md5
cd ${ROOTDIR}
else
cd ${ROOTDIR}
fi

# Generate the mtree spec.
# Not really necessary anymore.
#mtree -c -p ${ROOTDIR}/chroot -K flags,gid,mode,nlink,uid,link,time,type > ${ROOTDIR}/extra/mtree.spec

# and now we copy stuff into the live directories
echo "[${ARCHSUFFIX}-bit] Copying files for PXE, and ISO building, please be patient."
#rm -rf ${TEMPDIR}/*
cp -af ${BASEDIR}/extra/${UXNAME}.png ${TEMPDIR}/.
cp -af ${BASEDIR}/extra/${UXNAME}.png ${TFTPDIR}/.
mkdir -p ${TEMPDIR}/boot
cp -af ${CHROOTDIR}/boot/initramfs-linux-${PNAME}.img ${TEMPDIR}/boot/${UXNAME}.${ARCHSUFFIX}.img
cp -af ${CHROOTDIR}/boot/vmlinuz-linux-${PNAME} ${TEMPDIR}/boot/${UXNAME}.${ARCHSUFFIX}.kern
cp -af ${CHROOTDIR}/boot/initramfs-linux-${PNAME}.img ${TFTPDIR}/${UXNAME}.${ARCHSUFFIX}.img
cp -af ${CHROOTDIR}/boot/vmlinuz-linux-${PNAME} ${TFTPDIR}/${UXNAME}.${ARCHSUFFIX}.kern
cp -af ${ARCHBOOT}/* ${HTTPDIR}/${DISTNAME}/.
chown -R ${HTTPUSR}:${HTTPGRP} ${HTTPDIR}
chown ${TFTPUSR}:${TFTPGRP} ${TFTPDIR}/${UXNAME}.*
}

106
lib/08-stuffy.func.sh Normal file
View File

@ -0,0 +1,106 @@
function stuffy {

cp -f ${BASEDIR}/VERSION_INFO.txt ${TEMPDIR}/.

if [[ "${I_AM_A_RACECAR}" == "y" ]];
then
RACECAR_CHK='nice -n "-19" '
else
RACECAR_CHK=""
fi

echo "Setting up EFI stuff..."

mkdir -p ${TEMPDIR}/{EFI/{${DISTNAME},boot},loader/entries}
# this stuff comes from the prebootloader pkg and gummiboot pkg. lets us boot on UEFI machines with secureboot still enabled.
cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi ${TEMPDIR}/EFI/boot/bootx64.efi
cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi ${TEMPDIR}/EFI/boot/.
cp ${BASEDIR}/root.x86_64/usr/lib/gummiboot/gummibootx64.efi ${TEMPDIR}/EFI/boot/loader.efi # TODO: can i use syslinux.efi instead?

echo "Checking/fetching UEFI shells..."
if [ ! -f "${TEMPDIR}/EFI/shellx64_v2.efi" ];
then
# EFI Shell 2.0 for UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=UEFI_Shell )
curl -o ${TEMPDIR}/EFI/shellx64_v2.efi https://svn.code.sf.net/p/edk2/code/trunk/edk2/ShellBinPkg/UefiShell/X64/Shell.efi >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
if [ ! -f "${TEMPDIR}/EFI/shellx64_v1.efi" ];
then
# EFI Shell 1.0 for non UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Efi-shell )
curl -o ${TEMPDIR}/EFI/shellx64_v1.efi https://svn.code.sf.net/p/edk2/code/trunk/edk2/EdkShellBinPkg/FullShell/X64/Shell_Full.efi >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi

# now for setting up loader config/entries. maybe add memtest or something in the future? i dunno.
cat > ${TEMPDIR}/loader/loader.conf << EOF
timeout 3
default ${UXNAME}_ram
EOF
cat > ${TEMPDIR}/loader/entries/${UXNAME}_ram.conf << EOF
title ${PNAME}
linux /boot/${UXNAME}.kern
initrd /boot/${UXNAME}.img
options copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
EOF
cat > ${TEMPDIR}/loader/entries/${UXNAME}.conf << EOF
title ${PNAME} (Run from media)
linux /boot/${UXNAME}.kern
initrd /boot/${UXNAME}.img
options archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
EOF
cat > ${TEMPDIR}/loader/entries/uefi2.conf << EOF
title UEFI Shell (v2)
efi /EFI/shellx64_v2.efi
EOF
cat > ${TEMPDIR}/loader/entries/uefi1.conf << EOF
title UEFI Shell (v1)
efi /EFI/shellx64_v1.efi
EOF


# create the embedded efiboot FAT stuff
# how big should we make the disk?
echo "Generating the EFI embedded FAT filesystem..."
FTSIZE=$(du -sc ${TEMPDIR}/{boot,EFI,loader} | tail -n1 | awk '{print $1}')
FATSIZE=$((${FTSIZE} + 64)) # let's give a little wiggle room
${RACECAR_CHK}truncate -s "${FATSIZE}"K ${TEMPDIR}/EFI/${DISTNAME}/efiboot.img
${RACECAR_CHK}mkfs.vfat -n ${DISTNAME}_EFI ${TEMPDIR}/EFI/${DISTNAME}/efiboot.img >> "${LOGFILE}.${FUNCNAME}" 2>&1
mkdir -p ${SRCDIR}/efiboot
mount ${TEMPDIR}/EFI/${DISTNAME}/efiboot.img ${SRCDIR}/efiboot
mkdir -p ${SRCDIR}/efiboot/EFI/${DISTNAME}
cp ${TEMPDIR}/boot/${UXNAME}.64.kern ${SRCDIR}/efiboot/EFI/${DISTNAME}/${UXNAME}.efi
cp ${TEMPDIR}/boot/${UXNAME}.64.img ${SRCDIR}/efiboot/EFI/${DISTNAME}/${UXNAME}.img
mkdir -p ${SRCDIR}/efiboot/{EFI/boot,loader/entries}
# GETTING DEJA VU HERE.
cat > ${SRCDIR}/efiboot/loader/loader.conf << EOF
timeout 3
default ${UXNAME}_ram
EOF
cat > ${SRCDIR}/efiboot/loader/entries/${UXNAME}_ram.conf << EOF
title ${PNAME}
linux /EFI/${DISTNAME}/${UXNAME}.efi
initrd /EFI/${DISTNAME}/${UXNAME}.img
options copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
EOF
cat > ${SRCDIR}/efiboot/loader/entries/${UXNAME}.conf << EOF
title ${PNAME} (Run from media)
linux /EFI/${DISTNAME}/${UXNAME}.efi
initrd /EFI/${DISTNAME}/${UXNAME}.img
options archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
EOF
cat > ${SRCDIR}/efiboot/loader/entries/uefi2.conf << EOF
title UEFI Shell (v2)
efi /EFI/shellx64_v2.efi
EOF
cat > ${SRCDIR}/efiboot/loader/entries/uefi1.conf << EOF
title UEFI Shell (v1)
efi /EFI/shellx64_v1.efi
EOF

cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi ${SRCDIR}/efiboot/EFI/boot/bootx64.efi
cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi ${SRCDIR}/efiboot/EFI/boot/.
cp ${BASEDIR}/root.x86_64/usr/lib/gummiboot/gummibootx64.efi ${SRCDIR}/efiboot/EFI/boot/loader.efi # TODO: can i use syslinux.efi instead?
cp ${TEMPDIR}/EFI/shellx64_v* ${SRCDIR}/efiboot/EFI/.
umount ${SRCDIR}/efiboot
echo "EFI configuration complete..."

}

296
lib/09-yo_dj.func.sh Normal file
View File

@ -0,0 +1,296 @@
function yo_dj () {
ARCH="${1}"
echo "Building the actual .iso image. This may take a while."
im_batman
ISOFILENAME="${UXNAME}-${VERSION}.iso"
if [[ "${MULTIARCH}" == "y" ]];
then
ISOFILENAME="${UXNAME}-${VERSION}-any.iso"
else
ISOFILENAME="${UXNAME}-${VERSION}-${ARCH}.iso"
fi

if [[ "${I_AM_A_RACECAR}" == "y" ]];
then
RACECAR_CHK='nice -n "-19" '
else
RACECAR_CHK=""
fi

# and why not? generate the ISO.
## we need to generate the isolinux.cfg
mkdir -p ${TEMPDIR}/isolinux
if [[ "${MULTIARCH}" == "y" ]];
then
## MULTIARCH ISO
cat > ${TEMPDIR}/isolinux/isolinux.cfg << EOF
UI vesamenu.c32
DEFAULT check
PROMPT 0
TIMEOUT 50
MENU HIDDEN
#ONTIMEOUT ${UXNAME}_ram
ONTIMEOUT check
MENU TABMSG Press [TAB] to edit options
#MENU TITLE ${PNAME} (ISO edition)
MENU ROWS 16
MENU TIMEOUTROW 22
MENU TABMSGROW 24
MENU CMDLINEROW 24
MENU HELPMSGROW 26
MENU WIDTH 78
MENU MARGIN 6
MENU IMMEDIATE
# http://www.colorpicker.com/
MENU color border 0 #00000000 #00000000 none
MENU color title 0 #FFF5B800 #00000000 std
MENU color sel 7;37;40 #FF000000 #FFFFFFFF all
MENU color hotsel 1;7;37;40 #FFFF0000 #FFC0C0C0 all
MENU color hotkey 1;7;37;40 #FF0000CC #FFC0C0C0 all
MENU color tabmsg 1;31;40 #FF808080 #00000000 std
MENU color help 1;31;40 #FFFFFFFF #FF000000 none
MENU color timeout_msg 0 #FFFFB300 #00000000 none
MENU color timeout 0 #FFFF0000 #FF000000 none
MENU color cmdline 0 #FFFFFFFF #FF000000 none
MENU color cmdmark 1;36;40 #C000FFFF #FF000000 std
MENU color scrollbar 30;44 #FF00FF00 #FF000000 std
MENU color msg07 0 #FF000000 #00FFFFFF none
MENU BACKGROUND /${UXNAME}.png

LABEL check
MENU LABEL Your best supported kernel should be detected automatically.
COM32 ifcpu64.c32
APPEND ${UXNAME}_ram_64 -- ${UXNAME}_ram_32
MENU DEFAULT



LABEL local_override
MENU LABEL Local ^Boot
localboot 0
TEXT HELP
Boot from the local system instead.
ENDTEXT

LABEL reboot
MENU LABEL ^Reboot
COM32 reboot.c32
TEXT HELP
Reboot the machine
ENDTEXT

MENU SEPARATOR

## 64 BIT
MENU BEGIN 64BIT
MENU LABEL ^1) 64-Bit ...
ONTIMEOUT ${UXNAME}_ram_64
LABEL ${UXNAME}_ram_64
MENU LABEL ^1) ${PNAME} (run from RAM) (Default)
LINUX /boot/${UXNAME}.64.kern
INITRD /boot/${UXNAME}.64.img
APPEND copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
TEXT HELP
64-bit, run from RAM
ENDTEXT
MENU DEFAULT

LABEL ${UXNAME}_64
MENU LABEL ^1) ${PNAME}
LINUX /boot/${UXNAME}.64.kern
INITRD /boot/${UXNAME}.64.img
APPEND archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
TEXT HELP
Same as the above, except run directly from the CD-
don't copy the image to RAM. (Best for lower-memory boxes)
ENDTEXT

MENU END

MENU BEGIN 32BIT
MENU LABEL ^2) 32-Bit ...
ONTIMEOUT ${UXNAME}_ram_32

## 32 BIT
LABEL ${UXNAME}_ram_32
MENU LABEL ^1) ${PNAME} (run from RAM) (Default)
LINUX /boot/${UXNAME}.32.kern
INITRD /boot/${UXNAME}.32.img
APPEND copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
TEXT HELP
32-bit, run from RAM
ENDTEXT
MENU DEFAULT

LABEL ${UXNAME}_32
MENU LABEL ^2) ${PNAME}
LINUX /boot/${UXNAME}.32.kern
INITRD /boot/${UXNAME}.32.img
APPEND archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
TEXT HELP
Same as the above, except run directly from the CD-
don't copy the image to RAM. (Best for lower-memory boxes)
ENDTEXT

MENU END
EOF
else
## ARCH-SPECIFIC ISO
cat > ${TEMPDIR}/isolinux/isolinux.cfg << EOF
UI vesamenu.c32
DEFAULT check
PROMPT 0
TIMEOUT 50
MENU HIDDEN
ONTIMEOUT ${UXNAME}_ram_${ARCH}
MENU TABMSG Press [TAB] to edit options
#MENU TITLE ${PNAME} (ISO edition)
MENU ROWS 16
MENU TIMEOUTROW 22
MENU TABMSGROW 24
MENU CMDLINEROW 24
MENU HELPMSGROW 26
MENU WIDTH 78
MENU MARGIN 6
MENU IMMEDIATE
# http://www.colorpicker.com/
MENU color border 0 #00000000 #00000000 none
MENU color title 0 #FFF5B800 #00000000 std
MENU color sel 7;37;40 #FF000000 #FFFFFFFF all
MENU color hotsel 1;7;37;40 #FFFF0000 #FFC0C0C0 all
MENU color hotkey 1;7;37;40 #FF0000CC #FFC0C0C0 all
MENU color tabmsg 1;31;40 #FF808080 #00000000 std
MENU color help 1;31;40 #FFFFFFFF #FF000000 none
MENU color timeout_msg 0 #FFFFB300 #00000000 none
MENU color timeout 0 #FFFF0000 #FF000000 none
MENU color cmdline 0 #FFFFFFFF #FF000000 none
MENU color cmdmark 1;36;40 #C000FFFF #FF000000 std
MENU color scrollbar 30;44 #FF00FF00 #FF000000 std
MENU color msg07 0 #FF000000 #00FFFFFF none
MENU BACKGROUND /${UXNAME}.png

LABEL local_override
MENU LABEL Local ^Boot
localboot 0
TEXT HELP
Boot from the local system instead.
ENDTEXT

LABEL reboot
MENU LABEL ^Reboot
COM32 reboot.c32
TEXT HELP
Reboot the machine
ENDTEXT

MENU SEPARATOR

MENU BEGIN ${ARCH}BIT
MENU LABEL ^1) ${ARCH}-Bit ...
ONTIMEOUT ${UXNAME}_ram_${ARCH}
LABEL ${UXNAME}_ram_${ARCH}
MENU LABEL ^1) ${PNAME} (run from RAM) (Default)
LINUX /boot/${UXNAME}.${ARCH}.kern
INITRD /boot/${UXNAME}.${ARCH}.img
APPEND copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
TEXT HELP
${ARCH}-bit, run from RAM
ENDTEXT
MENU DEFAULT

LABEL ${UXNAME}_${ARCH}
MENU LABEL ^1) ${PNAME}
LINUX /boot/${UXNAME}.${ARCH}.kern
INITRD /boot/${UXNAME}.${ARCH}.img
APPEND archisobasedir=${DISTNAME} archisolabel=${DISTNAME}
TEXT HELP
Same as the above, except run directly from the CD-
don't copy the image to RAM. (Best for lower-memory boxes)
ENDTEXT

MENU END
EOF
fi

stuffy

rm -f ${ISOFILENAME}
if [ "${ARCHBOOT}" != "${TEMPDIR}/${DISTNAME}" ];
then
mkdir -p ${TEMPDIR}/${DISTNAME}
rsync -a --delete ${ARCHBOOT}/. ${TEMPDIR}/${DISTNAME}/.
fi
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isolinux.bin ${TEMPDIR}/isolinux
#cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isolinux-debug.bin ${TEMPDIR}/isolinux/isolinux.bin #debugging
#cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/* ${TEMPDIR}/isolinux/. #debugging
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/vesamenu.c32 ${TEMPDIR}/isolinux
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/linux.c32 ${TEMPDIR}/isolinux
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/reboot.c32 ${TEMPDIR}/isolinux
if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ldlinux.c32 ];
then
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ldlinux.c32 ${TEMPDIR}/isolinux
fi
if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libcom32.c32 ];
then
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libcom32.c32 ${TEMPDIR}/isolinux
fi
if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libutil.c32 ];
then
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libutil.c32 ${TEMPDIR}/isolinux
fi
if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ifcpu64.c32 ];
then
cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ifcpu64.c32 ${TEMPDIR}/isolinux
fi
cd ${TEMPDIR}

cd ..
${RACECAR_CHK}xorriso -as mkisofs \
-quiet \
`#-joliet` \
`#-rock` \
`#-omit-version-number` \
`#-disable-deep-relocation` \
-iso-level 3 \
-full-iso9660-filenames \
-volid "${DISTNAME}" \
-appid "${DISTDESC}" \
-publisher "${DISTPUB}" \
`#-preparer "prepared by ${0}"` \
-preparer "prepared by ${DISTPUB}" \
-eltorito-boot isolinux/isolinux.bin \
-eltorito-catalog isolinux/boot.cat \
`#-isohybrid-mbr ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isohdpfx.bin` \
-no-emul-boot \
-boot-load-size 4 \
-boot-info-table \
-isohybrid-mbr ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isohdpfx.bin \
-eltorito-alt-boot \
-e EFI/${DISTNAME}/efiboot.img \
-no-emul-boot \
`#--efi-boot EFI/${DISTNAME}/efiboot.img` \
-isohybrid-gpt-basdat \
-output "${ISODIR}/${ISOFILENAME}" "${TEMPDIR}" >> "${LOGFILE}.${FUNCNAME}" 2>&1


#isohybrid ${ISOFILENAME}
cd ${ISODIR}
${RACECAR_CHK}sha256sum ${ISOFILENAME} > ${ISOFILENAME}.sha256
cd ..
echo "ISO generated; size is $(ls -lh ${ISODIR}/${ISOFILENAME} | awk '{print $5}')."
echo "SHA256 sum is: $(awk '{print $1}' ${ISODIR}/${ISOFILENAME}.sha256)"
echo "You can find it at ${ISODIR}/${ISOFILENAME}"
#rm -rf ${TEMPDIR}/*

# are we rsyncing?
if [ -n "${RSYNC_HOST}" ];
then
rsync -a ${TFTPDIR}/. ${RSYNC_HOST}:${RSYNC_DEST}/tftpboot/.
rsync -a ${HTTPDIR}/. ${RSYNC_HOST}:${RSYNC_DEST}/http/.
# rsync -a ${TEMPDIR}/boot/${UXNAME}.* ${RSYNC_HOST}:${RSYNC_DEST}/http/.
rsync -a ${ISODIR}/. ${RSYNC_HOST}:${RSYNC_DEST}/iso/.
rsync -a ${ROOTDIR}/extra/. ${RSYNC_HOST}:${RSYNC_DEST}/extra/.
fi
}

104
lib/10-mentos.func.sh Normal file
View File

@ -0,0 +1,104 @@
function mentos {
# Freshen up the chroots to git's HEAD. Package lists, overlay, etc.
sed -i -e '/base-devel/d ; /multilib-devel/d' ${BASEDIR}/extra/packages.*
# both
echo "Installing common packages..."
PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.both | tr '\n' ' ')

if [ -f "/usr/bin/systemd-nspawn" ];
then
CHROOTCMD="systemd-nspawn -D"
else
CHROOTCMD="${CHROOTDIR64}/bin/arch-chroot"
fi

if [[ "${I_AM_A_RACECAR}" == "y" ]];
then
RACECAR_CHK='nice -n "-19" '
else
RACECAR_CHK=""
fi

if [[ -n $(find ${BASEDIR}/extra/pre-build.d/ -type f -newer ${BASEDIR}/root.x86_64/boot/vmlinuz-linux-${PNAME}) ]];
then
touch ${LOCKFILE}
sleep 2
find ${BASEDIR}/extra/pre-build.d/ -exec touch '{}' \;
rsync -a ${BASEDIR}/extra/pre-build.d/64/. ${BASEDIR}/root.x86_64/.
rsync -a ${BASEDIR}/extra/pre-build.d/32/. ${BASEDIR}/root.i686/.
find ${BASEDIR}/root.x86_64/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
find ${BASEDIR}/root.i686/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
fi
for i in ${CHROOTDIR32} ${CHROOTDIR64};
do
echo -n "...Packages installing/upgrading to ${i}..."
local INSTKERN=$(file ${i}/boot/vmlinuz-linux-${PNAME} | awk '{print $9}' | cut -f1 -d"-")
local MIRROR=$(egrep '^Server' ${i}/etc/pacman.d/mirrorlist | head -n1 | sed -e 's/^Server\ =\ //g ; s#$repo.*#core/os/x86_64/#g')
local NEWKERN=$(curl -s "${MIRROR}" | grep linux | awk '{print $3}' | cut -f2 -d\" | egrep '^linux-[0-9].*pkg.tar.xz$' | cut -f2 -d"-")

if [[ -n $(find ${BASEDIR}/extra/pre-build.d/ -type f -newer ${BASEDIR}/root.x86_64/boot/vmlinuz-linux-${PNAME}) ]] || [[ "${INSTKERN}" != "${NEWKERN}" ]];
then
${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -Syyua --noconfirm --devel" >> "${LOGFILE}.${FUNCNAME}" 2>&1
else
${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -Syyua --noconfirm --devel --ignore linux,linux-${PNAME}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -S --needed --ignore linux,linux-${PNAME} --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
#${CHROOTCMD} ${i}/ bash -c "yaourt -S --needed --noconfirm ${PKGLIST}"
if [[ -n $(find ${BASEDIR}/extra/pre-build.d/ -type f -newer root.x86_64/boot/vmlinuz-linux-${PNAME}) ]];
then
${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}mkinitcpio -p linux-${PNAME}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
echo "Done."
done
# we need to set -e for the following as they may fail.
# 32-bit
echo "Installing packages for 32-bit..."
PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.32 | tr '\n' ' ')
if [ -n "${PKGLIST}" ];
then
${CHROOTCMD} ${CHROOTDIR32}/ bash -c "yes '' | ${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
for x in $(find ${CHROOTDIR32}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done

# 64-bit
echo "Installing packages for 64-bit..."
PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.64 | tr '\n' ' ')
if [ -n "${PKGLIST}" ];
then
${CHROOTCMD} ${CHROOTDIR64}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
for x in $(find ${CHROOTDIR64}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
#${CHROOTCMD} ${CHROOTDIR64}/ bash -c "yaourt -S --needed --noconfirm ${PKGLIST}"
echo "Syncing overlay..."
rsync -a ${BASEDIR}/overlay/64/. ${CHROOTDIR64}/.
echo "Done."

echo "Syncing overlay..."
touch ${LOCKFILE}
sleep 2
find ${BASEDIR}/overlay -exec touch '{}' \;
rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR64}/.
rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR32}/.
rsync -a ${BASEDIR}/overlay/32/. ${CHROOTDIR32}/.
rsync -a ${BASEDIR}/overlay/64/. ${CHROOTDIR64}/.
find ${CHROOTDIR64}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
find ${CHROOTDIR32}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
chown -R 1000:1000 ${CHROOTDIR32}/home/${REGUSR}
chown -R 1000:1000 ${CHROOTDIR64}/home/${REGUSR}
find ${CHROOTDIR64}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR64}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \;
find ${CHROOTDIR32}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR32}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \;
chown -R 0:0 ${CHROOTDIR32}/root
chown -R 0:0 ${CHROOTDIR64}/root
find ${CHROOTDIR64}/root/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR64}/root/ -type f -exec chmod 600 '{}' \;
find ${CHROOTDIR32}/root/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR32}/root/ -type f -exec chmod 600 '{}' \;
echo "Done."
}

275
lib/mk.chroot.sh Executable file
View File

@ -0,0 +1,275 @@
#!/bin/bash

function mkchroot {

# just in case we don't inherit.
if [[ -z "${FUNCNAME}" ]];
then
FUNCNAME='mkchroot-standalone'
fi
## Import settings
if [ -f "build.conf" ];
then
echo "Now importing settings/variables."
set -e
source build.conf
set +e
else
echo "You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory)."
echo "If you are indeed in the correct directory, you may copy the sample at ../extra/build.conf.sample,"
echo "edit it for appropriate values, and copy to <PROJECT ROOT>/build.conf"
echo 'This error is fatal. Dying.'
exit 1
fi
if [[ ${EUID} -ne 0 ]];
then
#echo "This script must be run as root" 1>&2
echo "This script must be run as root."
exit 1
fi
if [ -z "${BASEDIR}" ];
then
echo 'You need to export the directory ("$BASEDIR") which will hold the chroots and the git project directory.'
echo "(don't worry, there's a .gitignore for the chroots)"
echo "e.g. export BASEDIR=\"/opt/dev/work/client-diag-disc/\""
echo 'Dying.'
exit 1
fi
if [ ! -d "${BASEDIR}" ];
then
echo "You need to make sure ${BASEDIR} is a valid, existing directory. This script does not automatically create it as a sanity measure."
echo 'Dying.'
exit 1
fi
if [[ "${EUID}" != "0" ]];
then
echo "This script must be run as root."
echo 'Dying.'
exit 1
fi
if [ -f ${LOCKFILE} ];
then
echo "Script already running, stale lockfile present, or an error occurred during last run."
echo "Please clear ${LOCKFILE} by hand before attempting another build."
echo -n "Timestamp of lockfile is: "
ls -l ${LOCKFILE} | awk '{print $6" "$7" "$8}'
exit 1
else
touch ${LOCKFILE}
fi
if [ -f "/usr/bin/systemd-nspawn" ];
then
CHROOTCMD="systemd-nspawn -D"
else
CHROOTCMD="${CHROOTDIR64}/bin/arch-chroot"
fi

if [[ "${I_AM_A_RACECAR}" == "y" ]];
then
RACECAR_CHK='nice -n "-19" '
else
RACECAR_CHK=""
fi

cd "${BASEDIR}"
## Set some vars.
MIRROR='http://mirrors.kernel.org/archlinux'
RLSDIR="${MIRROR}/iso/latest"
CURRLS64=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | awk '{print $2}' | grep 'x86_64')
CKSUM64=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | grep x86_64 | awk '{print $1}')
CURRLS32=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | awk '{print $2}' | grep 'i686')
CKSUM32=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | grep i686 | awk '{print $1}')
## Fetch latest tarball release
echo "Checking/fetching snapshots..."
if [ -f "latest.64.tar.gz" ];
then
LOCSUM64=$(sha1sum latest.64.tar.gz | awk '{print $1}')
if [[ "${CKSUM64}" != "${LOCSUM64}" ]];
then
echo "WARNING: CHECKSUMS DON'T MATCH."
echo "Local: ${LOCSUM64}"
echo "Remote: ${CKSUM64}"
echo "Fetching fresh copy."
curl -o latest.64.tar.gz "${RLSDIR}/${CURRLS64}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
else
curl -o latest.64.tar.gz "${RLSDIR}/${CURRLS64}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
if [ -f "latest.32.tar.gz" ];
then
LOCSUM32=$(sha1sum latest.32.tar.gz | awk '{print $1}')
if [[ "${CKSUM32}" != "${LOCSUM32}" ]];
then
echo "WARNING: CHECKSUMS DON'T MATCH."
echo "Local: ${LOCSUM32}"
echo "Remote: ${CKSUM32}"
echo "Fetching fresh copy."
curl -o latest.32.tar.gz "${RLSDIR}/${CURRLS32}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
else
curl -o latest.32.tar.gz "${RLSDIR}/${CURRLS32}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
if [ ! -f "${CHROOTDIR32}/etc/pacman.d/gnupg/trustdb.gpg" ] || [ ! -f "${CHROOTDIR64}/etc/pacman.d/gnupg/trustdb.gpg" ];
then
# Now let's ${BASEDIR}/extract that shit
echo "Extracting snapshots. This will take a while..."
## 64-bit
tar -xpzf latest.64.tar.gz
## 32-bit
tar -xpzf latest.32.tar.gz
# And configure the package manager
echo "Configuring snapshots..."
touch ${LOCKFILE}
sleep 2
find ${BASEDIR}/extra/pre-build.d/ -exec touch '{}' \;
rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/extra/pre-build.d/. ${BASEDIR}/root.x86_64/.
rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/extra/pre-build.d/. ${BASEDIR}/root.i686/.
rsync -a ${BASEDIR}/extra/pre-build.d/64/. ${BASEDIR}/root.x86_64/.
rsync -a ${BASEDIR}/extra/pre-build.d/32/. ${BASEDIR}/root.i686/.
chmod -f 755 ${BASEDIR}/extra/pre-build.d/{32/,64/,}etc/customizepkg.d/*
find ${BASEDIR}/root.x86_64/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
find ${BASEDIR}/root.i686/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
for i in i686 x86_64;
do
cat > ${BASEDIR}/root.${i}/etc/os-release << EOF
NAME="Arch Linux"
ID=arch
PRETTY_NAME="Arch Linux"
ANSI_COLOR="0;36"
HOME_URL="https://www.archlinux.org/"
SUPPORT_URL="https://bbs.archlinux.org/"
BUG_REPORT_URL="https://bugs.archlinux.org/"
EOF
done

# And make it usable.
echo "Initializing chroots..."
for i in ${CHROOTDIR32} ${CHROOTDIR64};
do
echo "Prepping ${i}. This will take a while..."
echo -n "...Key initializing..."
${CHROOTCMD} ${i}/ ${RACECAR_CHK}pacman-key --init >> "${LOGFILE}.${FUNCNAME}" 2>&1
echo "Done."
echo -n "...Importing keys..."
${CHROOTCMD} ${i}/ ${RACECAR_CHK}pacman-key --populate archlinux >> "${LOGFILE}.${FUNCNAME}" 2>&1
echo "Done."
echo -n "...Installing base packages..."
#${CHROOTCMD} ${i}/ pacstrap -dGcM base
# if that doesn't work,
${CHROOTCMD} ${i}/ pacman -Syy >> "${LOGFILE}.${FUNCNAME}" 2>&1
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
${CHROOTCMD} ${i}/ pacman -S --noconfirm --needed base >> "${LOGFILE}.${FUNCNAME}" 2>&1
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
echo "Done."
echo -n "...Upgrading any outdated packages..."
${CHROOTCMD} ${i}/ ${RACECAR_CHK}pacman -Syyu --noconfirm >> "${LOGFILE}.${FUNCNAME}" 2>&1
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
echo "Done. Finishing/cleaning up..."
${CHROOTCMD} ${i}/ pacman -S --noconfirm --needed yaourt >> "${LOGFILE}.${FUNCNAME}" 2>&1
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
${CHROOTCMD} ${i}/ pacman -S --noconfirm --needed base-devel >> "${LOGFILE}.${FUNCNAME}" 2>&1
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
done
${CHROOTCMD} ${CHROOTDIR64}/ 'pacman --noconfirm -R gcc-libs libtool' >> "${LOGFILE}.${FUNCNAME}" 2>&1
${CHROOTCMD} ${CHROOTDIR64}/ 'pacman --noconfirm -S multilib-devel' >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
# preprocessing
sed -i -e '/base-devel/d ; /multilib-devel/d' ${BASEDIR}/extra/packages.*
# both
echo "Installing common packages..."
PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.both | tr '\n' ' ')
for i in ${CHROOTDIR32} ${CHROOTDIR64};
do
echo -n "...Packages installing to ${i}..."
${CHROOTCMD} ${i}/ bash -c "yaourt -S --needed --noconfirm customizepkg-scripting" >> "${LOGFILE}.${FUNCNAME}" 2>&1
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
echo -n "Compiling kernel sources..."
set +e
${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm linux" >> "${LOGFILE}.${FUNCNAME}" 2>&1
set -e
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
echo -n "Regular packages..."
set +e
${CHROOTCMD} ${i}/ bash -c "yes '' | ${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
set -e
for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
echo -n "...Creating ${REGUSR} user..."
${CHROOTCMD} ${i}/ useradd -m -s /bin/bash -c "Default user" ${REGUSR} >> "${LOGFILE}.${FUNCNAME}" 2>&1
${CHROOTCMD} ${i}/ usermod -aG users,games,video,audio ${REGUSR} >> "${LOGFILE}.${FUNCNAME}" 2>&1
${CHROOTCMD} ${i}/ passwd -d ${REGUSR} >> "${LOGFILE}.${FUNCNAME}" 2>&1
mkdir -p ${i}/etc/sudoers.d ; chmod 750 ${i}/etc/sudoers.d
echo "${REGUSR} ALL=(ALL) ALL" >> ${i}/etc/sudoers.d/${REGUSR}
echo "Done."
done
for i in ${CHROOTDIR32} ${CHROOTDIR64};
do
${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}mkinitcpio -p linux-${PNAME}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
done
# 32-bit
echo "Installing packages for 32-bit..."
PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.32 | tr '\n' ' ')
if [ -n "${PKGLIST}" ];
then
${CHROOTCMD} ${CHROOTDIR32}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
for x in $(find ${CHROOTDIR32}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
echo "Done."
# 64-bit
echo "Installing packages for 64-bit..."
PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.64 | tr '\n' ' ')
if [ -n "${PKGLIST}" ];
then
${CHROOTCMD} ${CHROOTDIR64}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
fi
for x in $(find ${CHROOTDIR64}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
echo "Done."

echo "Syncing overlay..."
touch ${LOCKFILE}
sleep 2
find ${BASEDIR}/overlay -exec touch '{}' \;
rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR64}/.
rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR32}/.
rsync -a ${BASEDIR}/overlay/32/. ${CHROOTDIR32}/.
rsync -a ${BASEDIR}/overlay/64/. ${CHROOTDIR64}/.
find ${CHROOTDIR64}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
find ${CHROOTDIR32}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \;
chown -R 1000:1000 ${CHROOTDIR32}/home/${REGUSR}
chown -R 1000:1000 ${CHROOTDIR64}/home/${REGUSR}
find ${CHROOTDIR64}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR64}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \;
find ${CHROOTDIR32}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR32}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \;
find ${CHROOTDIR64}/root/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR64}/root/ -type f -exec chmod 600 '{}' \;
find ${CHROOTDIR32}/root/ -type d -exec chmod 700 '{}' \;
find ${CHROOTDIR32}/root/ -type f -exec chmod 600 '{}' \;
echo "Done."

rm -f ${LOCKFILE}
echo "Chroot setup complete."

}

mkchroot

0
overlay/32/.keepme Normal file
View File

0
overlay/64/.keepme Normal file
View File

View File

@ -0,0 +1,62 @@
[base]
## uncomment and set autologin username to enable autologin
#autologin=bdisk

## uncomment and set timeout to enable timeout autologin,
## the value should >=5
# timeout=10

## default session or desktop used when no systemwide config
# session=/usr/bin/startlxde

## uncomment and set to set numlock on your keyboard
# numlock=0

## set this if you don't want to put xauth file at ~/.Xauthority
# xauth_path=/tmp

# not ask password for users who have empty password
# skip_password=1

## greeter used to welcome the user
greeter=/usr/lib/lxdm/lxdm-greeter-gtk

[server]
## arg used to start xserver, not fully function
arg=/usr/bin/X -background vt1
# uncomment this if you really want xserver listen to tcp
# tcp_listen=1
# uncoment this if you want reset the xserver after logou
# reset=1

[display]
## gtk theme used by greeter
gtk_theme=Clearlooks

## background of the greeter
# bg=/usr/share/backgrounds/default.png

## if show bottom pane
bottom_pane=1

## if show language select control
lang=1

## if show keyboard layout select control
keyboard=0

## the theme of greeter
theme=Industrial

[input]

[userlist]
## if disable the user list control at greeter
disable=0

## whitelist user
white=

## blacklist user
black=

View File

@ -0,0 +1,9 @@
#/bin/sh -

#chmod 4755 /opt/google/chrome-beta/chrome-sandbox
mkdir -p /var/db/sudo/lectured
touch /var/db/sudo/lectured/bdisk
chmod 700 /var/db/sudo/lectured
chgrp bdisk /var/db/sudo/lectured/bdisk
chmod 600 /var/db/sudo/lectured/bdisk
chmod 4755 /usr/bin/sudo

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/NetworkManager.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/NetworkManager-dispatcher.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/getty@.service

View File

@ -0,0 +1,5 @@
#[Service]
##Type=simple
#Type=idle
#ExecStart=
#ExecStart=-/usr/bin/agetty --autologin bdisk --noclear %I 38400 linux

View File

@ -0,0 +1,11 @@
[Unit]
Description=Various LiveCD fixes
After=pacmandb.service

[Service]
Type=oneshot
ExecStart=/bin/bash /etc/systemd/scripts/livecd.fix.sh
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/NetworkManager.service

View File

@ -0,0 +1 @@
/etc/systemd/system/livecdfix.service

View File

@ -0,0 +1 @@
/etc/systemd/system/pacmandb.service

View File

@ -0,0 +1 @@
/usr/lib/systemd/system/sshd.service

View File

@ -0,0 +1,10 @@
[Unit]
Description=Restoring Installed Packages DB

[Service]
Type=oneshot
ExecStart=/usr/bin/tar -Jxf /usr/local/pacman.db.tar.xz -C /var/lib/pacman/
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target